Pages

Sunday, March 13, 2016

Knight Crest Bottle Label Print & Cut

Use the print & cut features of the Silhouette Cameo
to print this knight crest label onto adhesive label paper,
then attach to regular cut-out band,
personalize it if you choose, then place one
at each table setting of your Knight Quest Party Feast.
(Or, if you are using other systems, simply print
and "fussy-cut" the oval.)

ADVICE: Review a good tutorial to better understand
how to use the Silhouette Studio/Designer Studio
software and system (or other system you may be using)
that facilitates the print & cut process.
Here is one we recommend: 
https://www.youtube.com/watch?v=gMcWKW8Ep70

PROCESS & ASSEMBLY:
1. Set up the print & cut colored designs in the software,
selecting 8.5x11 paper size. Apply the registration
print marks to your setup (make sure the images
are positioned within the markings).
NOTE that the bottom registration mark has been
moved up -- and could have been moved up even
more to conserve label paper.
2. Select your printer and send the job to print.
For extra ease in the process, I have inserted
a sheet of adhesive back paper (label sheet).
Regular white card stock that your printer can handle
is also a good choice, but will need to have
adhesive applied to attach it to the band base.
3. Prepare the printed sheet to cut by positioning 
in the upper left of the cutting mat, in the usual manner.
Send the job to the cutter where the outer oval
shape will cut.
4. Lift the oval emblems from the cut mat . . .
. . . center and attach on the front of the
previously (conventionally) cut band.
5. Center the band front as desired on the
beverage bottle, then wrap the ends to the
backside, overlap and glue edges.
Here is the completed print and cut
bottle wrapper.

No comments:

Post a Comment