Circle Tag Garden Fresh

 

Round medium size tag features outer scalloped edge, 

outlined circle with angled banner-style panel. 

Fancy “Garden” letters are cut then positioned onto 

the partially welded ring/banner shape 

(watch for unattached ‘a’, ‘r’, and ‘n’). 

Word cut “fresh” is added on top. 

A single hang hole provides a place to attach 

with twine or narrow ribbon. 

Disc measures approx. 4” diameter. 

Size coordinates well with Box 3D Garden Crate gift box. 

Or use with a personal gift of garden produce, 

as invitation element to a harvest luncheon, 

or as sentiment tag on bottled preserves being gifted. 

ASSEMBLY: 1. Identify and cut the shapes:

A tag base with scalloped edge and hang tab

B contrast disc underlay

C accent overlay with diagonal panel edges

and partial "Garden" lettering

D opt. contrast diagonal panel underlay

E contrast rim ring (NOTE: an unbroken ring

is also included in the cut file)

F 'Garden' letters

HINT: leave the letters in grouped arrangement

during cutting, then retain the 'waste' portion as

placement guide (see Step 5)

G 'fresh' word cut

2. Position and attach the contrast diagonal panel

underlay behind the contrast diagonal panel ring.

3. Position the contrast disc behind the diagonal ring

rim assembly, rotating the ring to center the punch holes

array under the top "arch", then attach in place

where rim and panel overlap disc.

4. Position and attach the contrast ring (either whole

ring or separate parts where ends tuck up next

to letter edge shapes). 

5. Position and attach the separate letters over

the existing 'welded' letters, then . . . 

. . . position the separate letters between other

letters. NOTE it may be helpful to retain the weeded

"waste" paper scrap to use as a stencil overlay

to assist with positioning of individual letters

(when letters remain grouped when positioned

during cutting process). 

Here the 'stencil' is aligned over the in-position

letters to establish alignment, then individual

'e' is placed into window and attached.

Repeat for 'a' and 'r'.

(Remove and discard stencil when positioning 

has been established.)

6. Complete the tag:

A) position the inner tag assembly onto

the scalloped tag base;

B) apply hang hole eyelet if desired;

C) position and attach "Fresh" word cut.

Here is the completed tag.

The Garden Fresh round tag is specially sized

to adorn the top of the crate box that may hold

the Gardener Hat Easel Card.