Scalloped Egg with Studs Easel Card

Egg-shaped front panel includes cut out position circles 

for 95 studs. (Or use alternate contrast front panel 

“liner” shape to show thru in place of studs.) 

Mount center panel onto scalloped offset base, 

then assembly onto card base which includes 

a squared-off bottom edge for easel standing. 

Back panel includes a cross perforation line near center – 

attach upper portion behind front base panel to allow 

lower portion to bend away to provide self-easel capability. 

Card measures approx. 6” tall x 4.37” wide when closed 

(can fit in an A6 envelope). 

ASSEMBLY: 1. Identify and cut the shapes:

A hole punched front panel

B scalloped accent layer

C card front panel

D card back panel with horizontal per line

Also shown is the sheet of stud jewels which was

purchased from Dollar Tree store, including 219 studs,

with adhesive back; connecting adhesive "sprues"

need to be cut at stud edges.

2. Position, centered on both axis's, and attach

front panel on front of scalloped panel. 

3. Position and attach front panel assembly

onto front card panel, with narrow offset margin

of card front remaining visible at scallop edges.

4. Bend the back panel forward along perforation

in a "valley" fold.

Position upper portion of back panel back to back

behind the front panel assembly, align edges,

and glue the two upper portions together to create

the "self-easel" card stand.

5. Position and attach a matched size stud in

each of the punched circles.

And that is all there is to it!