Sandwich Mini Wedge Treat Box

Imitating take-away sandwich packaging, this triangular box hull 

is cut in one shape which bends to join at corners, 

forming a wedge compartment measuring 

approx. 3.5” tall x 3.5” wide x 1.5” deep. 

Angled wall panel includes a rectangular window to provide 

sneak peek at loose goodies inside, with a “window” panel 

to cut from clear vinyl material. 

At apex, large tab extends upward, containing punch holes 

for ribbon tying. Accent shapes are included to decorate 

triangle wall panels and end upright panel. 

Versatile box for many occasions. 

Add the coordinated accent shapes from 

“St Patricks Day Shamrock Flag Label and Ticket” separate design.

ASSEMBLY: 1. Identify and cut the shapes:

A box hull   B clear acetate or vinyl window "liner"

C front and back triangle, back rectangle wall accents

D-G optional shapes as embellishment from separate file:

"St Patricks Day Shamrock Flag Label and Ticket"

2. Prepare the hull shape by bending back on ALL

perforation lines for panels, tabs, flanges, except bend

forward on top extension fold-over panel base edge,

as indicated by pointing finger.

3. Fold the extension panel down, fold bottom tab

out of the way, and attach extension panel in place.

4. Prepare the see-thru window panel to be attached

by positioning and attaching two-sided tape such as

this Cool Tak permanent tape along front side edges.

5. Remove carrier tape, then position the clear panel

over the backside of the hull window opening

within the side perforations that define the angled wall,

and attach in place.

6. Position and attach the accent wall shapes on

the hull's outside surfaces, offset within the perforations

and cut edges that define the walls.

7. Begin shaping and assembling the box by bending

the window panel/side panel up into position so that

the first end edge aligns at the perforation line for

the extension panel's tab, then join the seam.

8. Repeat to join the seam for the opposite (bottom) 

edge of window panel and wall end tab.

NOTE that for both of the tight corner seams, it may

be helpful to insert a blade tool such as this spatula

inside the box to help push against the tab until

well secure.

9. Align edge and tab perforation to complete

the bottom back (right angle) seam.

10. With the box fully assembled at this point,

prepare to fill and close the back "lid" triangle panel.

To help it stay in closed position, add double-sided

tape along both the flanges face surface.

Bend the back triangle panel into closed position,

taking care to tuck the inward ends of flanges

inside, then carefully closing.

11. If desired, prepare the "lucky!" print and cut panel

following Silhouette America's online store 

Silhouette 101 tutorial for guidance.

(Or use the plain flag inner panel as desired.)

12. Position the printed inner panel over the offset

base tag shape, with double-point end edges aligned.

and attach. Add the shamrock shape over the assembly

to be within the matching offset edges, and attach.

14. Position and attach the flag assembly near

top of window panel, ticket at bottom, as shown.

Add a length of ribbon at panel extension hole

and knot as embellishment.

(Fill the compartment and close box.)

Here is the completed St. Patrick's Day treat box.

Change color scheme for accents, embellishments,

and treat for other holidays and occasions.