Thursday, February 8, 2024

Valentine Lollipop Sleeve Four Variations

 
Dress up a hard candy sucker for a Valentine’s 
special treat with these cover stands. 
Two styles are included with each design: 
tent style with fold-in base flanges to provide 
secure positioning rims; 
or simpler sticky-taped pinch-to-close top edges. 
Dress up the front panel with the scalloped discs, 
choosing which shapes you want, or 
the whole ensemble. 
If desired, substitute “print & cut” scallop front layer. 
Three designs available separately:
1) “Happy Hearts Day”, and “Feb 14” candy heart 
that can be stacked for thickness; 
2) Be Mine printed disc; 
or 3) Love You printed disc.
2) Be Mine printed disc; or 3) Love You printed disc.

Fourth design that includes cut shapes only
with swoosh heart and faux stitched disc.
Also suitable to embellish with your own “found” 
stickers and jewels, etc. 
Tent measure approx. 2.375” tall x 2.375” wide 
at base x 1.5” deep. 
Pinch-close style measures approx. 2.375” tall
 x 2” wide x 1.625” deep.

NOTE: the Happy Hearts Day disc "tent" style
design will be described thoroughly first, with 
the "pinch" sleeve simple assembly following in Step 14.
(Identifying and cutting steps are both at beginning.)
The other designs are similar enough that the general
assembly steps will can be followed for all other designs.

ASSEMBLY: 1. For the samples shown of the designs
which include the print & cut disc designs, begin by
identifying the shape that will be set up to print
then cut, then follow the standard processes to
accomplish the printing and cutting.
2. Identify and cut the shapes (tent style):
A main tent hull
B front offset accent shape
C medallion scallop base circle
D accent circle
E print & cut scallop circle
F stacked heart with print & cut front, 6 to layer
3. For the alternate design:
Identify and cut the shapes (pinch-top style):
A main tent hull
B front offset accent shape
C medallion scallop base circle
D accent circle
E print & cut scallop circle
F stacked heart with print & cut front, 6 to layer
For either design: 
4. Layer the main medallion shapes, centered,
and glue together.
5. Layer the candy heart shapes into a stack with
the printed shape on top, taking care to align
all cut edges as precisely as possible,
 and glue together
If possible, press the stacked shape with a heavy
flat weight such as this fabric covered weight brick,
and leave in place for several hours until thoroughly
dried.
6. Position the heart shape, centered on the medallion,
and glue in place.
For the tent style:
7. Prepare the main shape by bending back on
 the perforation lines for the center section . . .
. . . including the top "tent" bridge and flange tab.
For the side extensions, bend the mid lines into
an inverted 'V' to create the ridge.
8. Apply glue inside the ridge perforations, then . . .
. . . bend and flatten the ridge segments so they
stack on top of each other and apply thumbnail
pressure back and forth to securely join.
Take care that the end extension does NOT get
attached to the inward extension.
It may be helpful to bend the end flange back
to prevent attachment while continuing to apply
pressure until the rim is completely joined.
(Complete this step for both extensions.)
9. Apply adhesive to the underside of the extension
from inward perf line to edge of rounded flange . . .
. . . then bend the extension inward and
press in place until well attached.
Repeat for the opposite extension which
will meet up with the previous extension 
end edge.
10. Once the extensions are securely glued in place,
bend the rims into perpendicular position where
they will be ready to help hold the sucker in place.
11. Position the accent shape onto the front panel
with even offset margins at sides and bottom/top
panel-defining perforation lines.
12. To complete the gift, insert the sucker stick
into the "tent" panel hole . . .
. . . and bend the tent panel and back flange down
to overlap the top of back panel, straighten and
glue flange in place.
Here is the completed tent to this point of assembly.
13. Position and attach the medallion.
"PINCH" GLUE TAPE CLOSURE SLEEVE
14. Prepare the main shape by bending back on
the two bottom panel perforation lines.
15. Position and attach the front accent panel.
16. Apply two-sided sticky tape across one end
flange on the inward surface close to cut edge . . .
. . . insert lollipop between and so that it rests
on the center bottom panel.
Bend the front panel into position with stick
centered at half-circle cut out (helps keep lolli
straight), align and pinch the upper edges
until secure.
17. Position and attach the front medallion.



Thursday, February 1, 2024

Hearts Snowflake Vellum Fauxrigami

 

Fold along perforations of two layers of 
uniquely-folded hexagonal shapes which form base 
to arrange 6 folded points radiating from center 
for a hanging Valentine ornament for interior decor 
or as window-hanging sun catcher. 
Cut from opaque vellum so that the layers create 
gradations of color value. 
Top point includes hang hole for narrow ribbon or twine. 
Snowflake measures approx. 7.75” wide x 8.75” tall 
when fully assembled. 

ASSEMBLY: 1. Identify and cut the shapes:
A base points shape that creates outer points
B hexagon shape that creates middle "pie" layer
C top points shape with hang hole
D top points shapes (5)
2. The size for this hearts snowflake ornament has
been enlarged as fully as it can be to still be able
to fit all the shapes for one ornament onto THREE
8.5x11 sheets of opaque vellum, since that is the common
size available. (A good online resource for colored
vellum sheets is 12x12 CARDSTOCK SHOP 
(12x12cardstock.shop)
The three screens below show the way the three
sheets for this sample project were laid out to be cut:
3. This snowflake has identical construction and
assembly to the original vellum snowflake fauxrigami
project, except that there are cut out hearts at
a couple of edges where particular care should
be taken. Follow this LINK for that tutorial,
refer to Step 1 and follow Steps 2-10.
keeping in mind these small differences, below:

A) as the middle points shape is folded, take care
along the fold where perforation cuts out a bit
at each heart hollow.
This image shows those initial folds, and . . .
. . . here is the second fold that makes the assembly
into the hexagon middle unit.
Finish this unit by taping points in place
as described in the original assembly guide.
Ready to hang in a window or door glass panel,
from peg, knob, chandelier, etc.



Tuesday, January 30, 2024

Z Fold Heart Medallion Card Kit

 
Simplicity is elegance in this Z fold card,
the base shapes for which can be cut in one piece
from 12x12 paper stock and cutting capacity,
or in 2 pieces from smaller stock.
Accent shapes add background of interest,
with heart layered with offset contrast smaller hearts,
faux stitching detail and loopy lace edge.
Card measures approx. 4.25" x 5.5" when assembled
and folded.

Coordinates well with Env Heart Faux Stitch Flap A2.

ASSEMBLY: 1. Identify and cut the shapes
A bi-fold card base
B front accent overlay
C inside panel overlay with XOXOXO cut outs
D-F doily heart medallion shapes
2. Layer the medallion shapes in order,
centering each so that the offset margin is
even all around.
3. Fold the card base as shown to create
the 'Z' formation with the narrow panel as front left.
4. Position and attach the front panel overlay with
narrow offset margin at edges and next to fold.
5. Position interior panel on the interior large
space, with narrow offset margin equal at edges
and next to inside fold edge, and with XOXOXO
cut outs at lower right corner as shown.
6. Position the assembled medallion so that the left
half is centered top to bottom along the front fold,
and the vertical centerline of hearts lies exactly
along the fold edge as shown. 
Apply adhesive only on the left half that will attach, 
then . . .
. . . glue in place. NOTE it may be easier to
accomplish positioning and attaching with card open.
7. If desired, position and attach the message
plaque on the backside of the front panel as shown.
It also could fit just opposite on the larger overlay
next to the card fold.
Here is the completed card.