Dove Layered Ornament

Graceful dove with outlined details in wings and tail overlays 

messages love and peace for Christmas, New Year, 

wedding, Valentine, and more. 

Built-up layers (9 for body; 8 for wings) 

with stacked eye "dots" that fit into socket cutouts 

give this ornament strength, weight and presence. 

Hang tab accepts ribbon or twine as hanger. 

Embellish with pearl bead on hang loop, 

glitter on over-wings, etc. 

Measures approx. 6" long x 4.25" tall.

ASSEMBLY: 1. Identify and cut the shapes:
A right body (3)   B left body (3)
C left body overlay (3)
D right body overlay (3)
E & F eye mini circle (3 each for left and right)
G & J wing middle layers: 
1 of left; 1 of right for each wing unit
H & L wing overlay: 3 for each wing unit
I & K wing overlay: 3 for each wing unit
M right upper wing: 3
N left upper wing: 3
NOTE: the hanger tab(s) in middle body shapes 
have been slightly modified in the final version.

2. Layer the shapes to create thick shapes,

taking care to line up cut edges as accurately

as possible, apply pressure all around to

make sure edges adhere properly:

stack and glue middle wing 3 shapes 

for left and right . . . 

. . . then press under a flat weight until dry.

3. Stack and glue left and right wing overlay

3 shapes, for both left and right wing units.

4. Stack and glue upper wing 3 shapes,

one for left wing, and one for right wing.

5. Assemble the wing unit by layering a left wing

overlay onto the middle wing layer stack . . .

. . . then the right wing overlay on the opposite side
of wing, taking care to line up cut edges
all around (then press under weight until dry).
Prepare two wing stack units.

6. Position and attach upper wing unit left & right units

on the outer "face" side of each wing unit,

matching cut edges. Press flat.

7. Layer left (shown here) body middle layers 

and the right body middle layers into stacks,

taking care to match up cut edges all around.

Press flat until dry.

8. Stack and glue the 3 right body (shown here) and

3 left body shapes, edges carefully aligned, 

and press flat. 

9. Position middle body stacks back to back,
carefully aligning cut edges, and glue together, press.

10. Position, align cut edges, and attach
both the body overlay stacks onto the appropriate
face of the middle layers stack. Press under weight
until dry. 

11. Layer and glue together 3 eye circle punches

into left eye, and 3 circles into right eye.

12. Position and attach each eye stack

into the eye recess cut circle on left and right

"faces" of bird body.

13.Thread a 12-14 inch length of silk ribbon or

twine through the middle body tab

(it is easier to access at this point in construction).

14. Locate the wing position guide dash lines

on right body face layer (rounded at wing front

and straight short line halfway back toward tip), 

then position wing accordingly, with tip

approx. 1/4" away from tail, and glue in place.

15. Locate wing position guide dash lines (only rounded 

at wing front, then position left wing accordingly

with 1/4" between wing near-tip and tail edge,

and glue in place. 

This frame shows where to measure the 1/4"

space between wing tips and tail.

Press with weight until dry.

16. Tie ribbon hanger loop ends into knot, with optional

bead threaded on first.

Add "sugar" glitter to over wing if desired.

Dove 3D Box

Create for holiday decorating 

or to give as a unique gift box. 

Dimensional dove is built as "lid" and "base" insert. 

Wings dimension created from multiple layers 

plus accent graduated-offset overlays. 

Tail also has built-up side accents. 

Beak is constructed separately and then attached. 

Measures approx. 5.25" head to tail, 

4" bottom to tail tip, 2.125" across breast. 

ASSEMBLY: 1. Identify and cut the shapes:

A center body/head

B right side body

C right side body

D tail     E tail l & r accents

F eye contrast underlays (l & r)

G beak     H base box

I wing l & r layers for build up

J wing bases (includes attachment tab)

K wing accent base build up

L-N 2 accent build up layers, top accent

2. Prepare the left and right side body shapes

by bending back on all tabs and perforation lines.

3. Prepare center body/head shape by bending

back on all perforation lines, except for final two

lines at the wider end, which should be 

bent forward.

4. Prepare the tail shape by bending back

on all tab and other perforation lines. 

5. Glue the left and right eye contrast underlay

shapes behind the eye cutout on corresponding

sections of the left and right body shapes.

6. Begin side panel construction by bending

the side front segment inward, allowing

the angled adjacent straight edge to overlay

the long tab, and glue in place.

Also overlap the lower straight edge over

the corresponding lower front tab, and

glue in place.

7. Begin to join the center body/head panel

to the right side assembly by lining up the segment

that includes the beak tab slot next to the eye segment,

overlapping the tab, adjusting to align the edges,

then glue in place.

Line up and attach the lower segment edge

to the lower side tab.

Continue the sequence by bending to allow
for positioning each

center segment straight edge along

the corresponding side edge tab

until all edges and tabs are attached.

8. Repeat the process of joining side and center

panels for the left side body panel, beginning at

eye edge and slot segment, following step 7.

Reach fingers inside body cavity to align

and apply pressure to the seams.

9. Wrap the back body segment to bring opposite

straight edge to overlap the tab, adjust

and attach in place.

10. Fold the body bottom flanges inward . . .

. . . and glue in place to create a bottom rim.

11. Position and attach the tail accent shapes

offset within the side panels.

12 Bend the tail center section down, bend side

panels down to overlap side edges over 

the center section tabs, and glue in place.

 Then . . . 

. . . bend the center end section into position

with the straight side edges overlapping

center tabs, and glue in place.

13. Bend tail opening tabs inward slightly,

then insert into the end body opening so that

the body straight edges overlap tail tabs.

Reach fingers inside body cavity to apply 

pressure to complete gluing of seams.

14. Prepare the beak shape by bending back

on all angled edges and side tab.

15. Form the beak into a pyramid shape to bring

the straight side edge overlap the opposite tab . . .

. . . and glue in place.

NOTE it will be helpful to insert a flat pointed tool

such as this fingernail file inside the beak

to provide a "press against" surface.

16. Position the beak over the front of body,

insert the lower tab into the body slot,

bend tab downward inside body,

and glue in place.

17. Apply glue along the beak rim 

on the underside, then bend beak into position

to press the beak edges against the body

until glued edges are securely in place.

18. Prepare the left and right wings by layering

and gluing the wing base shapes, one by one, 

taking care to line up edges as precisely as possible.

NOTE: Use a flat weight to help keep glued-up layers

flat and smooth, and to avoid warping and curling.

19. Prepare the bottom wing layers by bending

connection tab outward, then . . . 

. . . position each on the corresponding wing

build up back-to-back, and glue in place.

(Use weights as glue dries.)

20. Prepare the smaller inner wing build up

and accents by layering the whole base shapes

as with the main wing.

Also attach the three top accent layers in order

taking care to line up the cut edges of the

"vein" cutouts. NOTE that outer edges

of these shapes are slightly offset as shown

here with the contrast top accent layered onto

the next lower layer.

21. Position and attach the top accent layered unit

to the top of the upper buildup layers,

taking care to align outer cut edges

as precisely as possible.

22. Position and attach the upper accent wing

unit onto the base wing, with offset margin

around at edges.

23. Apply liberal amount of quick-grab glue

to the area of the wing's underside 

where it will touch body panel, then

position wing on corresponding side of body assembly, 

inserting wing tab into body hole . . .

. . . adjust wing positioning as desired

(NOTE that model has first scallop "valley"

aligned at tail upper edge), then bend tab back

inside body and glue in place.

Hold wing in place and apply pressure until

glue is dried and it is secure.

Repeat for second wing.

24. Prepare base box (insert) by bending back

on all perforation lines and tab lines.

25. Locate the 'F' cut into the tab that

shows which end of the box is the "front".

Bend the front, back and sides up into position,

overlap the straight edges to the tab perforation

lines, and glue in place to form an open-top box.

26. To complete the dove or close the box,

insert the box top ('F' front positioned correctly)
into the body bottom opening

(this is a snug fit), then . . .

. . . slide completely into position where

the base box bottom will be nearly flush

with body rim edges.

Here is the completed dimensional dove box,

as seen from the front . . .

. . . and from the side.