Simple one-shape square envelope with side
seams,
fold-over triangle flap (with opt. reinforcement overlays)
and pair of
thickened discs, anchored with regular sized eyelets,
with attached-in-place
twine (for flap disc)
to wrap across to front panel disc as closure.
Envelope
measures approx. 5”x5” square when closed.
Coordinates in size for the “Card
Photo Folded Squares” .
ASSEMBLY: 1. Identify and cut the shapes:
A envelope one-piece base
B twine discs - two sets
(3 to stack for thickness)
C smaller disc stems - two sets
(2 to stack for thickness)
D 9-inch length of twine or perle cotton
for closure
on all perforation lines for envelope body bottom,
ALL cut edges aligned carefully, and attach together.
5. Position smaller twine circles into a stack with
5. Position smaller twine circles into a stack with
ALL cut edges aligned carefully, and attach together.
Position smaller stack on underside of larger stackwith punch hole edges carefully aligned.
Repeat the steps to prepare 2 stacks.
circles stack and glue a short tail to bottom of
smaller circle. (More often, the twine is simply attached
next to the hole under the stack, with intention of
catching and securing with eyelet; twine more directly
travels under discs.)
8. Apply glue to all of smaller circle
exposed face, then . . .
. . . position the stack assembly onto the flap face
with twine directed toward bottom edge of flap,
circle openings aligned carefully, then attach.
11. Position and set eyelets through both circles,then wrap the twine in figure 8 as shown,
until wrapped a couple of times.
No comments:
Post a Comment