Envelope Oversize Disc with Twine Closure

Classic rounded flap styling with raised discs and 
attached twine for closing with optional “Gingerbread” 

trim strip for flap accent. 

Measures approx. 6.5” wide x 7.75” tall when fully closed. 

Designed to fit “House Gabled Pop Out Card”. 

For more information about that card, follow this LINK.

ASSEMBLY: 1. Identify and cut the shapes:

R envelope front with attached flap, side & bottom flanges

S envelope back panel

T optional "gingerbread" trim strip for flap

U disc assemblies - 2 sets of 2 large & 3-4 small

Also shown: 2 contrast reg. size eyelets, 9-10" twine

2. Prepare the envelope front panel by bending back

 flap and all 3 flanges.

3. Position the trim strip across flap, keeping it

parallel to the flap bend line, and moving it to

where side edges of flap and trim align; attach.

4. Assemble the two discs:

A) layer large discs and join together, taking care

to align all cut edges; press flat under a heavy

flat weight until thoroughly dry.

B) layer small discs and join in similar manner.

C) position small stack behind large stack,

align hole cut out edges and glue together; press.

5. Begin envelope assembly by inserting eyelet

through disc stack hole from front/large disc side.

6. Position one disc assembly over back panel

front face and insert eyelet into hole.

7. Reverse panel to be face down then use setting tool

to attach eyelet. (Take care not to smash eyelet,

but make sure it is secure.)

8. For flap disc, insert the end of 9-10" length of

regular gauge twine through hole first, then insert

eyelet/discs assembly and set eyelet so that twine

is securely "caught" and attached.

9. Bend side flanges inward, and use tool to crease.

10. Position card back over front, with side flanges

in between, then adjust so that bottom edge clears

bottom flange perforation enough to bend that flange

up into position in next step. Securely glue side seams.

11. Apply glue then bend bottom flange up into

position. Crease for crisp fold. Press under heavy

flat weight until all seams are flat and secure.

12. Insert contents, close flap, then . . .

. . . wrap twine around discs in figure 8.

Trim excess twine length as needed.

Here is the closed envelope, ready to give.

This oversize envelope coordinates well with

the Card 3D Gabled House Pop Out.