Monday, May 26, 2014

3D Firecracker Stick Ensemble Tutorial

Get ready for a fun Fourth of July season
with this set of patriotic dimensional firework pillars.
Each is a separate cut file download,
available from SnapDragon Snippets
through the Silhouette America online store (pending)
or the SVG Attic shop (pending).
Built as a full-length "lid" with a shorter "base",
these boxes measure approx. 7.5" for tall,
6.75" for medium, 6" for short.
Cut file includes the embellishment front details and cuff "wrap"
(these samples feature a wrap cut as strip from corrugated kraft,
with colored raffia wrapped around cuff).

1. Identify and cut the shapes needed for the specific size you are building. The sample for this tutorial is the medium size, but construction is identical for all three sizes, except for the different layered embellishment emblems.

NOTE 1: the "Top hex form" shape was modified after this image was photographed to include a hexagon-shaped finger hole.

NOTE 2: the "Fuse" is best cut from regular weight or print paper. The paper used in the tutorial model has a metalic scroll "print" design, and is the weight of type paper, so it rolls easily, curls to imitate a sparkling fuse, and fits into the fuse hole.

NOTE 3: The "Wrap" for the model was cut from corrugated kraft paper. If your cutting tool will not cut this type of dimensional paper and you wish to use it in your project, use the wrap cut shape as a TEMPLATE to rotary cut the required shape, then score the corrugated paper where the original shape has perforation rows.

2. Fold the Lid Body on vertical perforations between sections and at tab, then unfold.

Fold bottom edge tabs back toward body (inward or mountain folds), then unfold.

3. Fold rim perforations of each section at top of body as shown here, then unfold:
a) tab perforation inward (valley)
b) next two perforations outward (mountain)

4. Glue each accent shape centered side-to-side within segment perforations, with top and bottom edges aligned at corresponding body perforation lines.

5. Form the body into a tube and join the long side seam.

(See next frame for a helpful tip.)

To help with the gluing and attachment of seam edges, use a long pencil or rod or similar tool inserted into the tube and held behind the seam to press against. Apply pressure all along the edges until they hold firmly.

(I find that moving fingers along the edge more or less constantly will help with this.)

6. Apply glue and fold bottom edge tabs inward to attach inside the tube.


7. Re-position the rim extensions into center of body tube. Each section includes an overlap extension and tiny tab on one end (lower edge in the image at left), and a miter-cut edge on the opposite end.

The miter-cut edge of each section will overlap the adjacent extension, all around the rim.

Apply a little adhesive to the tiny tab, and perhaps an even smaller amount to the edge of the extension (try not to put too much that may NOT end up being covered by miter edge.

8. After glue is applied, re-arrange the rims sections as shown here . . .

. . . then work with each joint to ensure that as much connection and securing as possible is achieved. Then move quickly onto the next step.

9. Apply glue to the "ledge" formed by the folded-horizontal tab extensions. 

Place the Lid Hex Form into the top hexagon opening . . .

. . . then work around each section, inserting finger tip into hex opening to connect with tab underneath. Apply pressure between finger tip and thumb on the top to "slide" the edge of hex form fully into the perforation angle of lid.

Move quickly around the circle performing this same "sliding" operation to help the body tube take most perfect possible hexagon shape with hex form edges aligning as perfectly as possible at tab angle.

10. Prepare fuse. apply a dot of glue to the TOPSIDE at first edge of fuse shape at uncut portion of the shape (that is, below the cut strips section, and above the end tabs section). 

Use a narrow coffee straw (or equivalent) to help roll the fuse width into a tight tube.

11. Apply dot of glue at the end of the shape in the uncut portion, then hold and apply pressure against the rolling tool until secure.

Remove the straw tool.

12. Insert the fuse tab ends from front to back through the hex opening in the fuse top hex shape.

13. Bend each tab back, arrange so they don't stack on top of each other, then glue in place on the backside of the hex shape.

14. Apply adhesive all around the ledge the Hex Lid Form (already in place inside the tube body). Place the Fuse Hex form into the recess and hold until secure.

Curl the fuse strip ends slightly. (Sometimes simply removing the shape from the sticky mat will provide the curling desired!)

15. Prepare the box's Base shape. Fold at perforations as inward (mountain) folds of the base at each long side tab, each end tab, and at edges of center hexagon shape.

16. Bring straight edge and tab together to align edge at perforation and glue in place.

(See next frame for helpful tip.)

To help join the seam, insert a tool into the base and position under the seam. Apply finger pressure against the seam edge and tool until seam is secure.

Complete all 6 seams.

17. Fold edge tabs to inside of base and glue each in place.

Optional Step 18.

To use the box as a container, you may wish to cover the finger hole. Place and attach the solid hexagon base shape as shown.

When the base is inserted into the bottom of the lid body tube, it is easy to push the base too far inside the tube. Accessing the finger hole makes it possible to pull the base back into proper position, or to remove it.

19. Insert base into bottom of body tube and slide inside until base bottom aligns even with bottom edges of body.

20. Fold cuff Wrap at perforations, then position and glue in place centered (or in position of your choice) along body. Back edges of wrap should meet at the center back.

This sample uses corrugated kraft paper which I prefer not to cut with my cutting machine. Instead, I cut a Wrap shape to use as a template, then cut the corrugated rectangle, then used the perforations on the template to score vertical fold creases in place.

21. Prepare the embellishment shield. Here all three size Stick designs are shown assembled.

Embellishment designs include a base with fold-out threading tabs. (You can use the plain shape if preferred, and simply glue it in place, if desired.)

When gluing the layers, take care to keep the tabs folded out so they don't get joined in place flat.

NOTE: Since this scalloped circle shape can be rotated into many positions, take care that the tabs remain horizontal in relation to the star and "1776" positions on the front layers. Otherwise, the circle when tied into place may not be straight.

TIP: When positioning and gluing lettering with separate, unconnected shapes as are those of this "July 4th" plaque, consider positioning the outer rectangular frame shape around the letter cut lines on you screen mat in the final positioning, to cut a stencil.

Position the stencil over the base to which letters will be glued and secure with masking (or other temporary) tape. Apply adhesive through the openings onto the base, then place each letter or number shape into the stencil. When all are in place, carefully remove the stencil, and apply pressure to ensure letters stay in place.

22. Position and glue the shield in place.

(To use raffia wrap, proceed to next step.)

To place embellishment using raffia, bundle just 3 or 4 strands of raffia, align or trim ends straight, then thread through tab holes. Slide along raffia to allow a short end to extend to back of stick for tying. Wrap opposite raffia length three or more times around body, then tie ends at back with double knot and trim ends short.

Finished! Here is the Medium Size Stick.

Sunday, May 25, 2014

Grad Box Card Construction Tutorial

Box card brimming over with little paper "celebrations"
of a graduate's accomplishments.
Bottomless box folds flat to put into special sized envelope.
Open, it holds grad tag on front flap, congratulations arch
with grad year (also includes 2015-2017), two balloon sets,
grad cap with tassel, diploma.
Available soon from SnapDragon Snippets through
Silhouette America online store.

1. Identify and cut the shapes. Gray shapes are the box body and the two bridges.

Stripe shapes are the outer box decorative shapes.

Lower accent shapes are for the flaps of the inner box surfaces.

2. Glue the short and tall box accent shapes to the front of the box sections.

3. Glue the short and tall flap accent shapes to the inside of the box.

(NOTE: these were laid in place incorrectly for the photo. The full-length shape will be in the far left position, directly behind the tall box accent shape on the box front, as shown in the above image.)

4. Fold the box into a tube, bring the side tab to align with the short box edge and join.

5. If you are using the center front flap accent shape with the hole for inserting a brad, you will need to create the hole through the box layer. Use a sharp pointed tool like this awl to push through the layers.

6. Layer and glue the "GRAD" tag, then position on front with punch holes aligned, and glue in place. Insert and attach the brad.

7. Fold the end tabs of bridge pieces back. Apply glue to the tabs of front bridge, then insert into box opening and attach tabs to side edges approx. 1/3 of the way back from front of box, making sure bridge is parallel to box front.

(Move on to next step before glue is completely dried.)

8. Fold the box into its "flat" shape to make sure bridge will work properly as the box is folded. Allow slight ends adjustment, then pinch layers to secure the bridge ends to the box.

9. Repeat the positioning, gluing, folding and "pinching" process for the second bridge, placing it halfway between front bridge and box back.

10. Pre-assemble the decor shapes.

NOTE: The balloon "strings"/balloon base shapes need to be doubled for strength.

11. Position "congratulations" shape centered at back top of box, and glue bottom area in place where the two touch.

12. Center and attach the year plaque in place (see next frame for more detail).

NOTE:  I moved my shape up to be snugly under the congrats arch later in my construction, so it will show better.

To give the decorations more dimension, attach a few foam squares behind the year plaque shape, then attach in place on the box back.

13. Place and attach balloon shapes on each side of year plaque on box back. I attached balloon overlapping edge to the plaque which is in front of the box back surface since I used the foam squares to attach the plaque. I also attached the balloon strings down inside the box back.

14. Position grad cap extension behind the back bridge, angled slightly to the right, with the tassel brought over the bridge to lie in front of it (glue tip in place, too).

15. Position and glue the diploma shape along the front bridge, angled with swirly end up toward the left. 

NOTE: If you plan to use the companion box card envelope from SnapDragon Snippets (or included in one of the SVG Attic kits), be sure that attached decor shapes DO NOT extend beyond the 7x7 inch square size of the envelope when folded flat.

This image shows how to measure to ensure this sizing, at least for the width size.