Candy Boxes Three Sizes with Ribbon Slider Tags

Cut and create a sturdy, double-sided walls 

lidded box for chocolate candies or 

other treats & gifts. 

Box base is taller to include approx. 1/4” reveal 

of contrast at bottom when lid is fully closed in place. 

Fill, fit lid in place, then use a length of ribbon 

to wrap lengthwise for even more secure closure. 

Includes basic slotted ribbon-slider label 

for 7/8” wide ribbon. 

Three other shape tags with welded word cuts 

are also available that are designed and sized
for all of these boxes, and can be mixed and matched.

Boxes in three sizes:

 large (8 oz. chocolates) 7” x 4.5” x 1.25”

medium (4 oz. chocolates) 4” x 3.5” x 1.25”

mini 3.5” x 2.75” x 1.25”. 

ASSEMBLY: The three box sizes are assembled
in identical fashion. The middle size (4 oz) will be
shown in the tutorial.
1. Identify and cut the shapes:
A box lid    B box base
C opt. box base accent shape (reinforcement)
D & E ribbon slider tag and offset base

2. Prepare the base shape by bending back on

all perforation lines for panels, walls and tabs.

3.  Bend the first two adjacent sides back to form

the base "tray", bringing the straight side edge

to overlap the opposite tab to perforation line,

and glue in place. Repeat for 3 other corner seams.

4. Bend the wall extension inward and glue in place.
Repeat for all four inner wall extensions.

5. To reinforce the base and also provide a decorative

accent, position and attach the liner shape in the base.

6. Prepare the lid shape by bending back on all

perforation lines for top panel, walls, tabs and

inner walls, except bend the edge flange tabs

forward.

7. Bend adjacent walls back to align straight edge

over tab perforation as with base corner seam assembly,

and glue in place. Complete all four corner seams.

8. Bend the inner wall extensions inward until

it tucks snugly against backside of outer wall . . .  

. . . with the edge flange extending toward lid center,

and glue wall backsides together, and flange in 

place to backside of top panel.

Repeat for all four lid sides, NOTING that the flange
edges will come together in a miter alignment
at corners, as shown here.

9. Fit the lid neatly over the base - a snug fit . . .

. . . until fully closed. NOTE that a margin of
the base remains showing.

10. Layer the ribbon slider tag top layer onto

the offset base, taking care to align the slot openings

as precisely as possible, and glue together.

11. Thread the end of the ribbon length downward

through the first side slot, then across back,

then upward through second side slot.

Adjust ribbon length so that slider is approx. centered.

12. To complete the package, once the contents
are in place, position the tag over front of lid,
with ribbon extending around to base backside,
overlap ends, trim to size and secure ends in place.

Here is the completed 4 oz. size box.

Here are the three box sizes.

Rabbit Chase Window Tote Box Construction

Just in time for Easter treat gifting

is this unique little window tote box, 

now available from SnapDragon Snippets

through the Silhouette America online store.

The interior dimensions are 5" wide x 3.5" tall x 1.75" deep.

CONSTRUCTION:

1. Identify the cut shapes:

A. box front with window

B. box back

C. window opening contrast liner

D. mylar rectangle window

E. front/sides scallop strip

F. back scallop strip

G. front/sides strip

H. back strip

I. mini hearts

J. bunny body base

K. bunny front body

L. bunny head with eye dot

M. bunny contrast tummy

N. bunny contrast tail

2. Fold the  box back (shown here) and box front back on all perforations, except forward at the handle top perforation as shown.

NOTE: liner and mylar shapes (steps 3 & 4) can be positioned after the box front & back are joined, in step 5, if preferred. Doing this will mean the side seam of box front will glue to the box shape, not to the liner and mylar, and may mean getting a better attachment.

3. Attach (C) window opening contrast liner behind box front window opening so that an equal margin shows from the front.

4. Attach clear mylar rectangle on backside of window opening and liner shapes.

5. Join the front to back on one side side, then adjust the shapes by re-folding on the perforations to join the other side seam.

6. Position front scallop strip, centered, over the window, aligning perforations at corners. Glue to the box front at side of each window, then continue to wrap the strip to the back, fold tabs at ends to back side of box and secure. NOTE: scallop strip and strip do NOT have end perforations in order to allow a custom fit, depending on the paper weight/thickness you may be using.

7. Position and attach the back scallop strip on box back so that ends line up with previously attached front/sides strip.

8. Repeat the process for the straight strips, centering front, then back on the scallop strips.

9. Assemble the bunny decoration, beginning with base shape that will show to the front the back (bottom) leg and top (front) ear, then adding the body front, then the head.

When these shapes are in place, finish by placing the eye over the marked dot on head, fitting the tummy into place at lower body edge, tail over base shape.

10. Center the bunny and glue to the scallop band assembly. Attach each heart an equal distance from bunny at scallop band center.

11. Fold back lower section under, then front section that includes latch. Slide the latch into the slot to close. NOTE: the latch is made to fit very snugly into the opening, so you will need to angle and manipulate the side ends of the latch into the slot. Secure edges by applying adhesive (dry) before inserting latch, OR (wet) after the latch is in place, under the top outer edge (front) section. Be sure to "square up" the box before the adhesive is secure.

12. To latch handles (after contents are in place), bring the front and back together, then push through the half circles from the front, into the matching cut-outs on the back, and fold upward. Use a dry sticky dot to hold these in place, if necessary or desired, for a better closure.

Here, again, is the finished tote box.

You may be able to find other, seasonal decorations to size to fit in place instead of the bunny. Or use the tote with scallop trim strips decoration by itself.

For an extra decorative touch, tie a length of coordinated ribbon through the handles.